Hammerhead
Pallet Flow Configurator
About pallet flow
Your pallets

Your pallet and load

Pallet flow configurator

How this works

Answer a few questions about your products, your pallets and your building. The configurator sizes a pallet flow layout and draws it in 3D: how deep each lane should be, how many levels fit under your clear height, and how many pallet positions you get.

There are two ways to start. If you know your inventory, choose How much pallet flow I need and enter how many products you would store and how many pallets of each you keep on hand. If you have a space in mind, choose What fits in my space and enter its length and width.

Levels, aisles and pallet sizes follow the same layout rules as our warehouse capacity calculator. Counts can differ, because this tool sizes lane depth to your inventory and lets you choose which side of the pallet faces the aisle. The numbers are planning estimates. A Hammerhead planner checks the layout against your building, your forklifts and your actual pallets before anything is designed.

Copy the link to share your layout with your team. To get it as a PDF with a planner review, use the button in the results panel. Want the background first? Read about pallet flow rack systems.

Questions

What is pallet flow rack?

Pallet flow rack stores pallets in lanes that slope gently toward the front. You load each lane from the back, and pallets roll forward on wheels or rollers to the pick face, so the oldest pallet is always the next one out. That is first in, first out (FIFO), which suits dated or perishable products with several pallets of each on hand.

How deep should pallet flow lanes be?

Deep enough to hold the pallets of each product you keep between restocks. This tool goes up to 12 pallets; deeper lanes are engineered case by case. The configurator suggests a depth from your inventory, or from your daily movement if you know it. Products with only a few pallets on hand usually do better in selective rack, and the configurator tells you when that is the case.

How does pallet flow compare to selective rack?

Pallet flow fits more pallets in the same floor space, because each lane runs several pallets deep and only needs an aisle at the front and one at the back. Selective rack gives a forklift access to every pallet. The configurator shows both counts for your building.

What forklift do I need for pallet flow?

One that reaches the top level at the back of the rack and still carries your heaviest pallet at that height. The configurator shows the reach needed to load the top level. Check your truck's data plate for its capacity at that height.

Is the pallet flow configurator free?

Yes. You can use it and share your layout with no sign-up. To get the layout as a PDF and have a planner review it, send us your contact details from the results panel.

Planner review

Send me this layout

Tell us who you are and a planner will review this layout with you. Your layout PDF downloads as soon as you send it.