Our Work
Completed installs, expansions, and reconfigurations across a range of industries and system types. Filter by industry or system to find projects similar to your facility.
Retail North Carolina · 66 bays · 4-deep × 5-high push-back · 2 weeks from first call
Hammerhead relocated 66 bays of 4-deep, 5-high push-back racking for a furniture retailer in North Carolina without taking them apart. Each assembled bay rolled on caster dollies to a new area of the same warehouse, and the move was finished inside the two-week window the customer set.
San Bernardino County, CA · About 2,000 pallet positions · About 2 weeks
Hammerhead designed, supplied, and installed a pallet racking system for a temperature-controlled facility in San Bernardino County, CA. The project added roughly 2,000 pallet positions for the customer's temperature-sensitive inventory, installed in about two weeks.
Madison, WI to Salt Lake City, UT · 35,000 sq ft · 3 weeks · cleared 2 weeks early
A beverage company was decommissioning a 35,000 sq ft warehouse in Madison, WI on a tight, landlord-driven move-out timeline. Hammerhead tore out the full storage system, a structural pick module with carton flow and pallet flow plus selective pallet rack, and relocated it to the company's facility in Salt Lake City, UT for reinstallation, clearing the building two weeks ahead of the required date.
Redlands, CA · 20,000 sq ft · 1,500 pallet positions · 10 days
Seismic selective pallet rack replacement for a water storage facility in Redlands, CA, a high-seismic region. Hammerhead tore out the existing system, supplied new seismic-rated racking engineered to code, tightened the aisles, and added vertical storage to increase capacity by about 25%, all without interrupting the customer's warehouse operations.
Baytown, TX · 311 Bays (622 Beams & Decks) · 1 day
Rapid-turnaround pallet rack retrofit for a freight company in Baytown, TX. The customer needed beam levels re-adjusted across 311 bays on short notice, and Hammerhead had a crew on-site the following week, completing all 622 beam and deck relocations in a single day.
San Diego, CA · Small · 2 Days
Tear-down and full replacement of selective pallet racking for a US Air Force facility, upgrading capacity and bringing the system into seismic code compliance. Nucor racking installed with ProDeck and wire decking throughout.
Houston Metro, TX · 468 Positions · 2 Days
Custom powder-coated pallet racking and heavy-duty shelving with ProDeck wire decking, delivered on a year-end deadline for a municipal fire department's brand-new Houston-area facility spanning 10 separate storage room areas.
Commerce, CA · 100,000 sq ft · 4,000 pallet positions · 1 month · finished 2 weeks early
Drive-in and selective pallet rack project for a beverage distributor in Commerce, CA, expanding a 100,000 sq ft distribution center for a new product line. Hammerhead supplied a new structural racking system, relocated and upgraded the existing drive-in racking to meet code for heavier loads, and added another elevation, wrapping up two weeks ahead of schedule.
Carrollton, TX · 420 Pallet Positions · Completed 2025
Selective pallet racking installation for a plastic fabrication and PVC pipe fittings manufacturer in Carrollton, TX. Hammerhead designed the layout, secured a high-pile storage permit to safely maximize storage height, and completed installation on schedule despite DFW power outages, delivering 420 pallet positions and an immediate jump in operational efficiency.
Fayetteville, AR · 4,417 Pallet Positions · 2 weeks
Large-scale selective pallet rack installation for a full-service construction company, delivering 4,417 pallet positions and 1,096 pick levels across a new facility, roughly 400,000 pounds of customized steel racking. The system provides dedicated palletized storage for oversized items alongside hand-stack pick levels for smaller parts, all reinforced with rack protection accessories and engineered to structural compliance standards.
Las Vegas, NV · 20,000 sq ft · 7 days
A municipal water district in Las Vegas, NV needed to reorganize a 20,000 sq ft storage operation that no longer fit how the agency worked. Hammerhead removed the existing material and installed a mixed system of selective pallet rack, cantilever rack, and industrial shelving, engineered for the region's seismic requirements, raising capacity by roughly 60% while improving forklift access and reducing foot traffic.
Winston-Salem, NC · 23,000 sq ft · 504 pallet positions · 6 days
Multi-system storage installation for a recycling plant manufacturer, combining selective pallet racking, cantilever racks, and shelving to organize both large components and small parts across their production facility. The project delivered 504 pallet positions, 77 shelf levels, and 66 cantilever levels, all protected with rack safety accessories and backed by structural engineering for long-term compliance.
South Brunswick, NJ · 436,000 sq ft · 19,807 pallet positions · 5 weeks
Full teardown-to-reinstall rack relocation for a national moving and storage company. When the client vacated a facility in Wind Gap, PA, Hammerhead repurposed the existing racking for reinstallation at a 436,000 sq ft building in South Brunswick, NJ, delivering 19,807 pallet positions at four and five levels high in a 36-foot clear warehouse.
Channelview, TX · 8,014 pallet positions · 600,000+ lbs of steel · Under 2 weeks
Fully welded double-deep pallet racking system engineered, delivered, and installed for a 3PL in Channelview, TX, in the Houston port corridor. The system used over 600,000 pounds of steel to create more than 8,000 pallet positions, letting the customer significantly downsize their warehouse footprint through a condensed, high-density layout.
Bath, PA · 500,000 sq ft · 8,260 pallet positions · 6-8 weeks
High-density selective pallet rack installation for a national 3PL's 500,000 sq ft retail distribution facility in Bath, PA. Hammerhead designed, permitted, and installed 8,260 pallet positions at six levels high in a 36-foot clear building, on an expedited schedule driven by a major customer ramping up inbound volume.
Atlanta, GA · 7,680 Linear Feet · 5 Days
Custom-engineered security cage for archival document storage, built around repurposed shelving from a client's decommissioned facility to preserve usable assets instead of replacing them.
Vernon, CA · 30,000 sq ft · 2,200 pallet positions · 2 weeks · finished ahead of schedule
Selective pallet racking for a fine art storage 3PL in Vernon, CA, in a newly acquired building with a concrete slab only four inches thick. After other vendors could not solve the anchoring problem, Hammerhead engineered a screw-anchor solution, secured city approval, and installed 2,200 pallet positions, keeping the customer in the building they had just bought.
Lititz, PA · 100,000 sq ft · 430 pallet positions · 106 cantilever bays · Phased install
Phased selective and cantilever rack installation for a live event staging manufacturer's 100,000 sq ft warehouse in Lititz, PA. Hammerhead installed 430 pallet positions at four levels and 106 cantilever bays at four levels plus base in a 30-foot clear building, scheduling the work around the client's concert season, and relocated 21 bays of existing racking without teardown using a lift and rolling support system.
Las Vegas, NV · 240 pallet positions · 2x prior capacity · 1 week
Push-back racking installation for a specialty frozen food warehouse that had been floor-stacking pallets inside its freezer. Hammerhead designed and installed 4-deep and 6-deep push-back lanes two levels high, doubling storage from 120 pallets to 240 in the same room and giving the crew a single pick face for every lane.
Haslet, TX · 58,266 pallet positions · 6 levels high · 3 phases · about 4 months
Very narrow aisle pallet racking for a document storage facility in Haslet, TX, installed in three phases to just over 58,000 pallet positions at six levels high. The layout runs 80 inch wire-guided aisles and holds 74,000 sq ft of staging area open at both ends of the building.
Victorville, CA · 500,000 sq ft · 60,000 pallet positions · About 3 months
Very narrow aisle pallet racking across a 500,000 sq ft, 36 ft clear document storage building in Victorville, CA. The system delivers roughly 60,000 pallet positions at six levels high on 80 inch wire-guided aisles, with seismic doublers and footplates on the frames.
Redlands, CA · Multi-tier tube rack · 2 phases · 2 phases · about 10 weeks
Multi-tier tube rack system for high-density file folder storage at a records facility in Redlands, CA, engineered for a high seismic design category. The structure carries dense paper loads across stacked shelving levels with walkway decking on every tier.
Valencia, CA · 603,300 box positions · 3 phases · 3 phases · about 8 months
Multi-tier tube rack storage for a media archive facility in Valencia, CA, built out across phases to 603,300 box positions. Like the Redlands system it is engineered for a high seismic design category, with fixed stair access and walkway decking on every level.
Carrollton, TX · 2,000 pallet positions · 5 levels high · About 2 weeks
Very narrow aisle pallet racking added to an in-service document storage building in Carrollton, TX. Hammerhead designed, permitted, and installed 2,000 pallet positions at five levels high on 80 inch wire-guided aisles.
No projects match those filters. Contact us to discuss a similar project.
We scope each project around your facility, your product mix, and your operation. Start with a free consultation.
Schedule a Free ConsultationCall or Text (323) 628-8190 · info@hammerheadws.com
